Skip to main content

Start your computer from the USB stick

You have a USB stick with TunaOS on it. Now start the computer from that stick. TunaOS then runs from the stick, and the installer opens.

:::warning Back up your files first The installer erases the drive of the computer, with Windows or macOS and all files on it. To keep Windows, use wootc instead of the USB stick. :::

Do you not have a USB stick with TunaOS yet? Start on the download page.

On a PC​

1. Open the boot menu​

  1. Put the USB stick in the computer.
  2. Restart the computer.
  3. When the screen goes dark, push the boot-menu key for your brand again and again, until a menu shows.
BrandBoot-menu key
AcerF12 (if nothing shows, push F2, set F12 Boot Menu to on, then try again)
ASUSEsc on laptops, F8 on desktops
DellF12
FrameworkF12
GigabyteF12
HPEsc, then F9
Lenovo ThinkPad or ThinkCentreF12 (on some laptops, Fn and F12 together)
Lenovo IdeaPad or YogaF12, or the small Novo button on the side, then Boot Menu
Microsoft SurfaceHold Volume Down, then push and release the power button
MSIF11
SamsungF10 or Esc
Toshiba or DynabookF12
Other brandsTry F12, F11, F10, F9, F8 or Esc

Does Windows start again? Use the Windows menu instead:

  1. In Windows, open Settings, then System, then Recovery. (On Windows 10: Settings, Update & Security, Recovery.)
  2. Next to Advanced startup, select Restart now.
  3. Select Use a device, then select the USB stick.

2. Choose the UEFI entry of the USB stick​

The boot menu shows the drives of the computer. The USB stick shows with its brand name, for example SanDisk or USB HDD.

If the USB stick shows two times, choose the entry that starts with UEFI. TunaOS does not start in the old "Legacy" or "CSM" mode.

3. Keep Secure Boot on​

TunaOS starts with Secure Boot on. Do not turn Secure Boot off.

There is one exception: Marlin (Arch Linux) needs one more step at the first start. Your computer must accept the TunaOS key (a "MOK" key) one time. The Secure Boot guide shows how. All other images start with no extra step.

If the screen shows a "Secure Boot violation" message, write the stick again with TunaOS Media Writer and try one more time. If the message stays, read the Secure Boot guide.

On a Mac with an Intel processor​

  1. Put the USB stick in the Mac.
  2. Restart the Mac. Immediately push and hold the Option (⌥) key.
  3. Release the key when the Mac shows the startup disks.
  4. Select the disk with the name EFI Boot, then push Return.

Macs from 2018 to 2020 have a T2 security chip. Those Macs do not start from a USB stick until you allow it:

  1. Restart the Mac and hold Command (⌘) and R to open macOS Recovery.
  2. Select Utilities, then Startup Security Utility.
  3. Set Secure Boot to No Security. Under Allowed Boot Media, select the option for external or removable media.
  4. Restart, then do the four steps above.

On T2 Macs, the keyboard, trackpad, sound and Wi-Fi can fail to work in TunaOS. Test them in TunaOS from the USB stick before you install. Keep a USB keyboard and mouse near.

Macs with an Apple chip (M1 and newer) cannot start TunaOS yet. See Apple Silicon Macs.

If the computer does not start from the stick​

  • Push the boot-menu key earlier. Start to push it immediately after the restart.
  • Put the stick in a different USB port. Use a port on the computer, not on a USB hub.
  • Write the stick again with TunaOS Media Writer.
  • Use a different USB stick, with 16 GB or more.

Next: install TunaOS​

TunaOS starts from the stick and the installer opens. The installer guide shows each screen.